Displaying items by tag: circular economy

Saudi Arabia: Saudi Readymix and Finland-based Betolar have launched two new reduced-CO₂ concretes, produced using ground granulated blast furnace slag and natural pozzolans with Betolar’s Geoprime technology. One of the products is cement-free and the other has an ultra-low (2.5%) cement content. TradeArabia News has reported that the dual launch concludes a successful partnership between the companies, which began in 2023.

Saudi Readymix technology and strategy director Chris Leptokaridis said "Saudi Readymix has been at the forefront of developing new technologies to meet our customers' increasing demand for eco-friendly, low-CO₂ solutions. Our partnership with Betolar has enabled us to successfully deliver on this goal, offering groundbreaking concrete recipes that significantly reduce carbon emissions."

Betolar senior researcher Ahmad Alzaza said "This project pushed the boundaries of innovation by bringing low-carbon technology into the ready-mix concrete space. We are proud to have contributed to a solution that will help advance sustainable construction across Saudi Arabia."

Spain: The European ferrous slag association EuroSlag held its 12th biennial EuroSlag conference in Bilbao on 23 to 25 October 2024. The event addressed the transformation of steel industry by-products as a resource. Key themes included regulations, future trends and technical developments.

Addressing the conference, EuroSlag chair Thomas Reiche said that European cement producers eliminated 12Mt of CO₂ through the substitution of clinker with ferrous slags in 2023.

Europe: In 2023, 29.7Mt of slag entered the built environment in building materials in the EU and the UK. 20.3Mt (68%) of the slag was granulated blast furnace slag, of which 18.3Mt (90%) was ground for use in cement production, with the other 2Mt (10%) serving as aggregates. The remaining 9.4Mt of the slag was steelwork slag, of which 600,000t (6.4%) was used in cement and concrete production, with the rest used for roadbuilding.

Between 2000 and 2023, slag substituted for 752Mt of limestone, clay and sand in clinker production and for 405Mt of aggregates across the EU and UK construction sectors.

Thomas Reiche, chair of the European slag association EuroSlag and managing director of the FEhS Building Materials Institute, said "Despite the tensions on the European steel market, ferrous slags were once again able to make an important contribution to resource conservation, climate protection and the circular economy in 2023."

US: St Marys Cement won three national awards at the Slag Cement in Sustainable Concrete Awards 2023. The producer won the awards for supplying its slag cement for the construction of Wixom Assembly Park in Wixom, Michigan; of 333 North Water in Milwaukee, Wisconsin, and of Excellerate Manufacturing in Appleton, Wisconsin.

Spain: Heidelberg Materials and construction firm Viuda de Sainz plan to open a construction and demolition waste (CDW) recycling and slag grinding plant in Güeñes, Basque Country. The plant, called Harri Green, will be situated in Heidelberg Materials' existing Zaramillo limestone quarry. It processing capacities will be 140,000t/yr CDW and 20,000t/yr steel slag, with which it will produce aggregates. The cost of the plant is Euro2m.

Canada: Concrete block producer Canal Block has integrated CarbiCrete’s cement-free concrete production technology at its Port Colborne plant in Ontario. CarbiCrete’s technology produces concrete from steel slag. The integration at the Port Colborne plant commands US$2.24m-worth of funding from the global innovation cluster NGen, towards a total project cost of US$5.97m.

CarbiCrete CEO Chris Stern said "We are tremendously grateful for NGen's continued support, which is helping Canada position itself as the undisputed world leader in low carbon concrete."

Canal Block president Durk Bylsma said "Canal Block has had a long history of developing sustainable products for the masonry industry. We are excited to partner with CarbiCrete to bring this truly revolutionary technology to market and further our commitment to be an ecologically and socially responsible manufacturer."

Canada: Carbon-negative concrete producer CarbiCrete has signed a deal with Holcim subsidiary Lafarge Canada. Under the deal, Lafarge Canada will process steel slag at its St. Constant cement plant in Québec for use as an ingredient in CarbiCrete’s CO2-cured cement-free concrete.

CarbiCrete partner Patio Drummond produces carbon-negative concrete blocks using CarbiCrete’s technology at its Drummondville concrete block plant in Québec. The company is on a drive to double the production of CarbiCrete blocks. It first partnered with CarbiCrete during trial production of its material in 2018.

Lafarge Canada vice-president of cement Andrew Stewart said “We are committed to reducing our environmental footprint and leading the way in sustainable construction. Our partnership with CarbiCrete is a testament to our dedication to offering sustainable solutions and actively participating in the circular economy.”

CarbiCrete CEO Chris Stern said “Collaborating with Lafarge allows us to leverage long-established infrastructure and years of expertise in processing steel-related by-products. This enables us to make an immediate climate impact as we scale the deployment of our technology which reduces embodied carbon in concrete by both avoiding emissions and removing carbon through mineralisation.” Regarding the on-going scale-up of production at Patio Drummond’s Drummondville plant, Stern said “Increased production of our carbon-negative blocks brings us closer to our common goal of decarbonising production of the world’s most consumed man-made substance.”

UK: Holcim subsidiary Aggregate Industries has commenced its construction of a cement blending plant and import hub on the River Thames at the Port of Tilbury in Essex. The facility also includes units for the production of reduced-CO₂ cement components, including ground granulated blast furnace slag (GGBFS) and construction demolition waste (CDW)-based materials. The Tilbury site has five loading heads and will help Aggregate Industries to maintain its continuous supply of conventional, reduced-CO₂ and circular cementitious materials to London and South East England.

CEO Dragan Maksimovic said “This important investment will further strengthen our position in the market, allowing us to drive our sustainability ambitions and lead the way in low carbon and circular building materials. The London and South East construction market has major regional projects on the horizon, and we are primed and ready to meet the region’s rising demand for sustainable solutions.”

Steve Curley, managing director cement, added “Our ECOPlanet range of green cement was recently added to our green offering. By investing in this impressive facility within the Port of Tilbury, we will truly boost our sustainable offering and be more agile and efficient in the way we manufacture, transport and supply our products across this region.”

India: Bokaro Steel Plant has won granulated blast furnace slag (GBFS) supply contracts with ACC and UltraTech Cement. Under the contracts, Bokaro Steel Plant expects to supply 1.3Mt of GBFS from its facilities in Jharkhand for use in cement production in the state. The Pioneer newspaper has reported that the contracts will run until August 2026.

Germany: Building materials research institute FEhS-Institute says that cement producers used 7.9Mt of German ground granulated blast furnace slag (GGBFS) in cement production in 2022. This corresponds to 71% of the 11.1Mt of slag produced by the domestic iron and steel industries during the year. Other applications for the slag included aggregates production (3.1Mt - 28%) and internal recycling at the refinery (500,000t - 4.5%).

Managing director Thomas Reiche said "Unlike recycled materials, iron mill slags are already high-quality and climate-friendly secondary raw materials in their 'first life.' For decades they have made an important contribution to a sustainable recycling economy in Germany. To ensure that this can continue in the future after the transformation of the steel industry, we have been researching new slags together with our partners since 2013 - for example, with the Direct Reduction Of Iron Ore Electric Furnace Slag and Save CO2 projects to develop Blast Furnace Slag 2.0."